Pool equipment repair and installation in Brevard County
Pump humming, filter leaking, or the automation panel gone dark? We repair and replace the equipment on your pad, heaters first.
- 98 reviews, rated 5.0 of 5 on Google reviews
- Mon–Fri, 8am–5pm The form stays open after hours
What on your pad needs work?
Pick the part that's acting up.
-
Pool or spa heater
Heaters first. Not heating, won't light, or showing a code.
-
Pool pump
Humming, leaking, not priming, or a motor that's quit.
-
Filter
Leaks, cracks, and filter replacement.
-
Automation
Control panels, controllers and the actuators that turn your valves.
-
Salt system
Salt cell replacement.
-
Pool and spa lights
Lights that won't come on, flicker, or leak.
-
Gas line to the heater
Propane or natural gas, run to your heater.
Pool pumps
A humming motor, a leak, or a pump that won't prime. We repair and replace pumps and motors, including variable-speed upgrades.
See pool pump repair →Pool filter repair and replacement
Filter leaking, cracked, or past saving? We repair or replace the filter and the piping around it.
| What you see | What we do |
|---|---|
| Water leaking at the filter or its piping | We find the leak, then repair or replace the part or the piping. |
| A filter that isn't working | We check it, then repair it or replace it. |
| A filter you want replaced | We set the new filter and pipe it into your pad. |
Filter brands we service: Hayward SwimClear and ProSeries, Pentair Clean & Clear®, Sta-Rite System:3™ and Posi-Clear™ RP, and Jandy CC, CV, CL and CS series.
Seeing one of these? Call (321) 536-9122 or schedule service. Schedule Service or call (321) 536-9122.
Pool automation system acting up?
Control panel dead, or a valve that won't turn? We repair and replace automation controllers and the actuators that turn your valves.
We install automation, configure the app and walk you through the controls. Before we leave, we check that every component communicates.
We reconnect them on their existing power feed. If your system needs a new or upgraded electrical circuit, that part is done by a licensed electrical contractor.
-
Hayward OmniLogic
We service the OmniLogic Pool, Spa, and Backyard Automation System and OmniPL.
-
Pentair IntelliCenter
We service the IntelliCenter® Pool Control System, the IntelliConnect® Pool Control System and EasyTouch.
-
Jandy iAquaLink
We service the AquaLink® RS Pool & Spa Automation System and the iAquaLink app.
We also service standard Intermatic panels.
When the heater runs the pad. Raypak's Crosswind V heat pump runs one pump, two actuators and three auxiliaries through the Raymote app. We service Raypak and Rheem heater controls: AVIA, Crosswind V and the Raymote app.
Salt cell replacement
Salt cell worn out, or the system stopped making chlorine? We replace salt cells and their power units on your existing circuit.
| What you need | What we do |
|---|---|
| A worn-out salt cell | We replace the cell. |
| A failed power unit | We replace it on the existing circuit. |
| A new salt system | We install it and plumb the cell into your filter piping. A new supply circuit is work for a licensed electrical contractor. |
Hayward salt cell replacement
We service Hayward AquaRite salt systems.
Other salt systems we service: Pentair IntelliChlor®, Jandy AquaPure® and Jandy TruClear®.
Pool light repair and replacement
Pool or spa light dead, flickering, or leaking? We work on lights in their existing housing.
Light tripping the GFCI? Don't keep resetting it. If the light needs a new or upgraded electrical circuit, that part is done by a licensed electrical contractor.
We do these jobs for pool and landscape lighting only:
- Swap the bulb or LED in an existing light.
- Replace the whole light in its existing housing.
- Replace the light transformer.
Light brands we service: Hayward ColorLogic, Pentair IntelliBrite®, Jandy WaterColors and PAL Lighting.
What should you note before you call?
Got those? Call us.
Tell us what the equipment's doing — we'll get you on the schedule.
Call (321) 536-9122Who works on your pad?
"Very quick response and job well done. Thank you for the total pool support. Nat/Pro Gas has the best price around for a new heater and they do quality work."Rufus Williams
Quick answers
Do you repair pool equipment as well as heaters?
Yes. Heaters come first, and we also sell, repair and replace pumps, filters, automation and salt systems. We work on pool and spa lights too.
Do you install new pool equipment?
Yes. We install new pumps, filters, automation and salt systems. If the equipment needs a new or upgraded circuit, a licensed electrical contractor does that part.
How much does it cost to replace all your pool equipment?
It depends on which equipment, the models and your pad, so a flat number would mislead you. We quote the replacement once we know them.
A service call covers diagnosis and repair on the same visit. It is $140 local, or $160 in Palm Bay (including Grant), Melbourne Beach, and Titusville.
Can you replace a salt cell?
Yes. We replace salt cells and their power units on your existing circuit.
Do you fix pool lights?
Yes, in the light's existing housing. We swap the bulb or LED in an existing light, replace the whole light, or replace the light transformer, for pool and landscape lighting only. New or upgraded circuits are work for a licensed electrical contractor.
Tell us what the equipment's doing
Can't call right now? Send the details and we'll call you back.
Get the pad running again
Tell us which equipment and what it's doing. We repair and replace pool equipment across Brevard County.